Configure the sbc Core Entitites

Validate Configuration of Physical Ports.


The physical ports are automatically detected by the SBC.

  • goto Setup > IP Network > Core Entities > Physical Ports.
  • Ensure that you have at least two physical ports detected by the SBC.

Validate Configuration of Ethernet Groups.


The ethernet groups are automatically detected and automatically assigned to a Physical Port.

  • goto Setup > IP Network > Core Entities > Ethernet Groups.
  • Ensure that you have at least two Ethernet Groups detected by the SBC.

Configure LAN and WAN Paorts

  • goto Setup > IP Network > Core Entities > Ethernet Devices
  • Add appropriate vlan ID and Tagging.

Configure the Network Interface

  • goto Setup > IP Network > Core Entities > IP Interfaces
  • Configure Lan Interface (O+M+C Interface)
  • Configure Teams Interface
Parameter LAN (Example) WAN (Example)
Name (arbitrary) LAN Teams
Ethernet Device #0[vlan 1] #1[vlan 2]
Interface Mode IPv4 Manual IPv4 Manual
IP address 192.0.2.10 203.0.113.10
Prefix length 24 24
Default Gateway 192.0.2.1 203.0.113.1
Primary DNS 192.0.2.6 1.1.1.1
Secondary DNS 192.0.2.7 1.0.0.1

Configure the Media Realm

** Configure Media Realm for the Lan Interface **

  • goto Setup > Signaling and Media > Core Entities > Media Realms

    Parameter LAN TEAMS
    Index 0 1
    Name LAN (arbitary) TEAMS (arbitary)
    Topology Location Down Up
    IPv4 Interface Name #0 [LAN] #1 [TEAMS]
    Port Range Start 6000 7000
    Number of media session legs 100 100
    Default Media Realm Yes No